I am considering switching from a relatively slow DSL network to a considerably faster cable network. This means a new router and other hardware. I am thinking of perhaps getting an 802.11ac router. One hang-up I have in making a decision is that I cannot determine the characteristics of the WiFi client in my wife's laptop. Device Manager tells me that it is an Intel(R) WiFi Link 1000 BGN. How can I determine which standard (B, G or N) it is using and on which band it is operating? Are these settings over which I have any control? If so, how do I change them?
The environment for all computers is W7 x64.
This is something new for me.
WiFi Client Properties
-
- BronzeLounger
- Posts: 1598
- Joined: 26 Jan 2010, 20:28
- Location: Ottawa ON
WiFi Client Properties
Regards,
Paul
The pessimist complains about the wind. The optimist expects it to change. The realist adjusts his sails.
Paul
-
- GoldLounger
- Posts: 2599
- Joined: 24 Jan 2010, 15:26
- Location: Olympia, WA
Re: WiFi Client Properties
All that is required for the change is a new cable modem. The router that you have should work just fine with the new modem.
NOW, if you have a combined DSL modem/router, then, yes, you must get both new. As for the wireless, any new router, will work with any current machines running Windows 7. I have found that I have the best service from the NetGear brand and they are priced in the lower/mid range.
I currently am using a FVG318 from NetGear. It has 8 wired ports plus wireless. We use it to wireless connect a few visiting laptops, 2 Kindle Fire readers, and 7 machines on wired connections.
NOW, if you have a combined DSL modem/router, then, yes, you must get both new. As for the wireless, any new router, will work with any current machines running Windows 7. I have found that I have the best service from the NetGear brand and they are priced in the lower/mid range.
I currently am using a FVG318 from NetGear. It has 8 wired ports plus wireless. We use it to wireless connect a few visiting laptops, 2 Kindle Fire readers, and 7 machines on wired connections.
I am so far behind, I think I am First
Genealogy....confusing the dead and annoying the living
Genealogy....confusing the dead and annoying the living
-
- Panoramic Lounger
- Posts: 8177
- Joined: 25 Jan 2010, 09:09
- Location: retirement
Re: WiFi Client Properties
My understanding is that this means the wireless adaptor in the laptop will automatically switch to what ever the router is transmitting.PaulB wrote:it is an Intel(R) WiFi Link 1000 BGN. How can I determine which standard (B, G or N) it is using and on which band it is operating
Ken
-
- UraniumLounger
- Posts: 9295
- Joined: 13 Feb 2010, 01:27
- Location: Deep in the Heart of Texas
Re: WiFi Client Properties
I'm not an electrical engineer nor do I play one on TV, but it is my understanding that as long as one of the signaling protocols (B, N, G) is common between the router and the wifi adapter cards that the hardware will figure it out for itself. Of course, this could mean that you are not getting the maximum advantage of your router to computer as far as speed and reliability are concerned; but few home users below the level of eager gamers are likely to notice the difference.
Please, don't take this as gospel. Any here who can correct my statement, please do so.
Please, don't take this as gospel. Any here who can correct my statement, please do so.
Bob's yer Uncle
Dell Intel Core i5 Laptop, 3570K,1.60 GHz, 8 GB RAM, Windows 11 64-bit, LibreOffice,and other bits and bobs
(1/2)(1+√5) |
-
- BronzeLounger
- Posts: 1598
- Joined: 26 Jan 2010, 20:28
- Location: Ottawa ON
Re: WiFi Client Properties
Thank you all for contributing to my networking education.
Stuck, Bob, after some more research I was starting to suspect that, after following some handshaking protocol, the router and the client would work things out all by themselves. You kinda confirmed that.
Dave, I do have a combined router/modem (Thomson Speedtouch 585). Besides a new router, I need to get a DOCSIS 3.0 compliant modem given the bandwidth I'm looking at. While there are many excellent 'n' routers available, I'm leaning towards an 'ac' router if only to be ready for the future.
I'd still like to know if there is any way to determine the frequency and the protocol in use by a WiFi client and if there is any way to influence or set these settings.
P.S. Bob, I do hope that is not a plantar wart on your heel!
Stuck, Bob, after some more research I was starting to suspect that, after following some handshaking protocol, the router and the client would work things out all by themselves. You kinda confirmed that.
Dave, I do have a combined router/modem (Thomson Speedtouch 585). Besides a new router, I need to get a DOCSIS 3.0 compliant modem given the bandwidth I'm looking at. While there are many excellent 'n' routers available, I'm leaning towards an 'ac' router if only to be ready for the future.
I'd still like to know if there is any way to determine the frequency and the protocol in use by a WiFi client and if there is any way to influence or set these settings.
P.S. Bob, I do hope that is not a plantar wart on your heel!
Regards,
Paul
The pessimist complains about the wind. The optimist expects it to change. The realist adjusts his sails.
Paul
-
- Panoramic Lounger
- Posts: 8177
- Joined: 25 Jan 2010, 09:09
- Location: retirement
Re: WiFi Client Properties
Probably a plan but make sure any 'ac' router you consider is also at least 'n' compliant or your current laptop with it's BGN adaptor won't be able to talk to it.PaulB wrote:I'm leaning towards an 'ac' router if only to be ready for the future.
Or is that the excuse you need to upgrade the laptop as well ;grin:
Ken
-
- UraniumLounger
- Posts: 9295
- Joined: 13 Feb 2010, 01:27
- Location: Deep in the Heart of Texas
Re: WiFi Client Properties
Howdy, Paul!
If you look at Network Adapters in Device Manager (CP|System|Hardware|Device Manager gets you there in XP, don't know about Win&), you can see the characteristics of your wifi adapter. There should be something like it in Win7 but someone else will have to help you there.
Thank you for your concern, but that is tar sticking on my heel.
If you look at Network Adapters in Device Manager (CP|System|Hardware|Device Manager gets you there in XP, don't know about Win&), you can see the characteristics of your wifi adapter. There should be something like it in Win7 but someone else will have to help you there.
Thank you for your concern, but that is tar sticking on my heel.
You do not have the required permissions to view the files attached to this post.
Bob's yer Uncle
Dell Intel Core i5 Laptop, 3570K,1.60 GHz, 8 GB RAM, Windows 11 64-bit, LibreOffice,and other bits and bobs
(1/2)(1+√5) |
-
- UraniumLounger
- Posts: 9295
- Joined: 13 Feb 2010, 01:27
- Location: Deep in the Heart of Texas
Re: WiFi Client Properties
I'm not certain that I answered the question that you asked, Paul. My answer referred to network adapters on computers, specifically Win-based devices. I'm sure there are similar screens for apple products and smart phones that communicate using wifi.I'd still like to know if there is any way to determine the frequency and the protocol in use by a WiFi client and if there is any way to influence or set these settings.
If you were asking about checking protocols on a router, you can do that, too. You must know how to address the router, usually using a browser. In all of those that I've had experience with, placing IP address 192.168.1.1 will send a query to the router. You must then go through identifying yourself to the router, usually with a username and password. All manufacturers have their own defaults for those values. After completing the authentication process, you should see screens with tabs and options that will take you to the settings on the machine. You can see the current values and should be able to change them if you have permissions. I can view the IEEE 802.11.- protocol setting on my Linksys router in this manner. Most other manufacturers will have a similar interface.
HTH
Bob's yer Uncle
Dell Intel Core i5 Laptop, 3570K,1.60 GHz, 8 GB RAM, Windows 11 64-bit, LibreOffice,and other bits and bobs
(1/2)(1+√5) |
-
- BronzeLounger
- Posts: 1598
- Joined: 26 Jan 2010, 20:28
- Location: Ottawa ON
Re: WiFi Client Properties
Good point. While every 'ac' router I've looked at is backwards compatible with at least 'g' and 'n', I better not assume that all of them are.stuck wrote:Probably a plan but make sure any 'ac' router you consider is also at least 'n' compliant or your current laptop with it's BGN adaptor won't be able to talk to it.PaulB wrote:I'm leaning towards an 'ac' router if only to be ready for the future.
Or is that the excuse you need to upgrade the laptop as well ;grin:
Ken
So far I haven't come across any laptops that have 'ac' clients.
Regards,
Paul
The pessimist complains about the wind. The optimist expects it to change. The realist adjusts his sails.
Paul
-
- Panoramic Lounger
- Posts: 8177
- Joined: 25 Jan 2010, 09:09
- Location: retirement
Re: WiFi Client Properties
Not surprising from what I've read about 'ac', it's still only a draft spec.PaulB wrote:So far I haven't come across any laptops that have 'ac' clients.
Ken
-
- Administrator
- Posts: 12612
- Joined: 16 Jan 2010, 15:49
- Location: London, Europe
Re: WiFi Client Properties
I use a tool called inSSIDer for this. It will show all the wireless signals it can receive and tell you about frequencies, protocols and much more.PaulB wrote:...I'd still like to know if there is any way to determine the frequency and the protocol in use by a WiFi client and if there is any way to influence or set these settings...
You c an influence the settings from the properties of your wireless network adapter device.
StuartR
-
- BronzeLounger
- Posts: 1598
- Joined: 26 Jan 2010, 20:28
- Location: Ottawa ON
Re: WiFi Client Properties
Thanks, Stuart. I'll check it out.
Regards,
Paul
The pessimist complains about the wind. The optimist expects it to change. The realist adjusts his sails.
Paul